POLOPLAST

Suspended PP pipe systems for bridge and viaduct drainage.

POLOPLAST is an Austrian manufacturer of polypropylene pipe systems for wastewater, stormwater and building drainage. For bridges, viaducts, overpasses and elevated roads it supplies POLO-ECO plus Premium, a suspended multi-layer pipe system that collects deck water and carries it along the structure to the outlet or treatment point.

POLOPLAST: pipe systems from Leonding, Austria

The company traces its origins to a plastics business founded in Linz in 1954, which took the name POLOPLAST in the mid-1950s. Production moved to Leonding near Linz in the 1970s, where the headquarters and main plant are still located today, with around 350 employees. Since 1997 POLOPLAST has been a wholly owned company of the Austrian Wietersdorfer group.

The POLO-ECO plus family was introduced at the end of the 1990s as one of the first multi-layer polypropylene sewer pipes for larger diameters. The Premium version is now offered in ring stiffness classes SN 10, SN 12 and SN 16. According to the manufacturer, POLO-ECO plus Premium has been used on bridges throughout Europe since 2010, from motorway and railway bridges to urban structures.

Product information and installation guidance are available on the official POLOPLAST bridge drainage page and in the bridge drainage brochure (PDF).

Why bridge drainage needs a special pipe system

A drainage pipe hanging under a bridge deck works in harsher conditions than a buried sewer. It is exposed to direct sunlight, large temperature swings between summer and winter, vibration from traffic, wind loads and water containing de-icing salts. Conventional systems often reach their limits here: cast iron is heavy and corrodes, while ordinary plastic pipes can sag between supports, expand strongly with temperature or age under UV radiation.

POLO-ECO plus Premium was developed to address these points. The manufacturer lists the following properties for bridge use:

  • UV resistance – proper technical function guaranteed for at least 30 years when installed according to the guidelines.
  • Low thermal expansion – a coefficient of linear expansion of 0.044 mm/m·K.
  • High longitudinal stability – support spacing of 10 × outside diameter, up to 3.00 m.
  • Low weight – approx. 80% lighter than cast iron systems, which simplifies i
  • nstallation and reduces the load on the structure.
  • Resistance to de-icing salts and chemical resistance in the pH range 2–13.
  • Abrasion resistance and a smooth inner surface that keeps the hydraulic capacity even at low gradients.
  • White outer layer that reduces heat absorption and makes the pipe visually discreet under the deck.

Three layers, three functions

The POLO-ECO plus Premium pipe wall consists of three co-extruded layers, each designed for a separate task:

  • Outer layer – a mineral-reinforced PP blend that resists weathering and mechanical damage and reduces heat absorption from sunlight.
  • Structural layer – mineral-reinforced, highly crystalline polypropylene that provides strength, stiffness and toughness as well as longitudinal and point stability.
  • Inner layer – a smooth, abrasion- and impact-resistant surface that prevents encrustation and resists chemicals in the pH 2–13 range.

The result is a pipe that combines the low weight and corrosion resistance of plastic with the stiffness needed for long spans between hangers.

Installation: supports, fixed points and connections

Pipes and fittings are joined with push-fit sockets using Top-Connect technology, which also compensates for linear expansion. No welding or solvent cementing is needed on site. As a general rule the manufacturer specifies a maximum support spacing of 300 cm, with smaller spacings for small diameters at full flow:

  • DN 110–125: 150 cm at full load;
  • DN 160: 200 cm;
  • DN 250: 250 cm;
  • DN 315–630: 300 cm.

Fixed points can be placed up to 12 m apart. For lightly loaded lines, such as pipes used as cable conduits, longer spacings are possible depending on the actual weight. Prefabricated support and suspension points avoid later drilling or welding of the pipe fastenings.

A comprehensive range of special fittings is available for bridge drainage. The POLO-EHP Control cleaning pipe, made of polypropylene like the rest of the system and available from DN/OD 110 to DN/OD 500, provides access for inspection, maintenance and cleaning along the line.

Applications and reference projects

POLO-ECO plus Premium is used wherever water has to be carried along an elevated structure:

  • motorway and road bridges, overpasses and flyovers;
  • railway bridges and viaducts;
  • bridges over rivers and urban bridge structures;
  • refurbishment of existing bridge drainage with a tight construction schedule.

The manufacturer’s references include the complete refurbishment of the bridge drainage at the Villach junction in Austria (2,378 m, DN 75–500), the drainage of the new Danube bridge in Linz (1,100 m, DN 75–400) and bridge refurbishment on the A10 Tauern motorway (5,000 m, DN 160–630). Further projects include bridges on the A2 and A13 Brenner motorway in Austria and the Franz-Josef-Strauß bridge in Schweinfurt, Germany.

The water collected from the deck usually needs treatment before it reaches a watercourse. Combine the pipe system with our stormwater treatment equipment, or with storage tanks where the outflow has to be retained.

Why choose POLOPLAST through Vesmaco

Vesmaco OÜ has supplied water management and drainage products in Estonia, Latvia and Lithuania since 2000. We work with road authorities, designers and bridge contractors, so the drainage pipes are coordinated with gullies, outlets and treatment equipment from one supplier. For POLOPLAST bridge drainage projects we offer:

  • Technical selection – choosing diameters and stiffness classes for the expected flow, span and environmental conditions.
  • Design support – support and fixed-point spacing, cleaning access and special fittings for the bridge layout.
  • System approach – drainage pipes together with separators, treatment units and retention tanks at the end of the line.
  • Delivery – coordinated supply of pipes, fittings and accessories to sites in the Baltics, with English-language documentation.

Planning a new bridge or the refurbishment of existing bridge drainage? Send us the drawings, the required diameters and lengths and the project schedule, and we will propose a suitable POLOPLAST solution with a material list. Contact Vesmaco for technical selection and a quotation.